The list below details the error codes that appear in dialog boxes on Windows: Code Description ———- 0 R was successfully completed. 1 Incorrect function. 2 The specified file…

You are watching: computer error code numbers

.

The list below details the error codes that appear in dialog boxes on Windows:

Code Description
————————
0 The operation was successful.
1 Incorrect function.
2 The specified file could not be found.
3 The specified path could not be found.
4 The system cannot open the file.
5 Access denied.
6 Invalid descriptor
7 Memory control blocks have been destroyed.
8 Not enough space to process this command.
9 Invalid storage control block address.
10 Incorrect environment.
11 Attempting to load an incorrectly formatted program.
12 Invalid access code.
13 Invalid data.
14 Not enough memory for this operation.
15 The specified drive could not be found.
16 Failed to delete directory.
17 Unable to move file to a different disk drive.
18 There are no more files.
19 Write-protected media.
20 The specified device could not be found.
21 The device is not ready.
22 The device does not recognize the command.
23 Data error (cyclic redundancy check).
24 The program issued an incorrect length command.
25 The drive cannot find a specific area or track on the disc.
26 Unable to access the specified disk or diskette.
27 The drive cannot find the requested sector.
28 The printer is out of paper.
29 Cannot write to the specified device.
30 Cannot play on the specified device.
31 A device attached to the system is not functioning properly.
32 The process cannot access the file because this file is in use by another process.
33 The process cannot access the file because another process has locked part of it.
34 The drive does not contain the correct diskette. Insert xxx (volume serial number: xxx) into drive xxx.
36 Too many open files for a share.
38 End of file reached.
39 The disk is full.
50 This request is not supported.
51 Windows cannot find the network path. Verify that the network path is correct and that the destination computer is not busy or disabled. If Windows still cannot find the network path, contact your network administrator.
52 You were not connected because there was a duplicate name on the network. Go to System in Control Panel and change the computer name and try again.
53 The network path was not found.
54 The network is busy.
55 The specified network resource or device is no longer available.
56 The NetBIOS command limit has been reached.
57 A network card error has occurred.
58 The specified server cannot perform the requested operation.
59 Unexpected network error.
60 The remote card is not compatible.
61 The printer queue is full.
62 The server does not have enough space to store the file to be printed.
63 Your print pending file has been deleted.
64 The specified network name is no longer available.
65 Network access denied.
66 The network resource type is incorrect.
67 Network name not found.
68 The name limit for the local computer network adapter has been exceeded.
69 NetBIOS session limit exceeded.
70 The remote server has been suspended or is starting up.
71 It is no longer possible to establish a connection with this remote computer at this time because there are already as many connections as the computer can accept.
72 The specified printer or disk device has been suspended.
77 When connecting hardware, the computer could not find enough memory to run the hardware, resulting in a BSOD.
80 File exists.
82 Could not create directory or file.
83 Failed on interrupt 24.
84 Not enough memory to process this request.
85 Local device name already in use.
86 The specified network password is incorrect.
87 Incorrect parameter.
88 Error writing to network.
89 The system cannot run another process at this time.
100 Could not create another system semaphore.
101 Another process owns the exclusive semaphore.
102 The semaphore is established and cannot be closed.
103 The semaphore cannot be reset.
104 Unable to request exclusive semaphores on interrupt.
105 This semaphore no longer has an owner.
106 Insert the diskette for drive xxx.
107 The program terminated because you did not insert another diskette.
108 The disk is either in use or locked by another process.
109 The communication channel has been closed.
110 Could not open the specified device or file.
111 Filename too long.
112 Insufficient disk space.
113 No more internal file identifiers available.
114 The internal target file identifier is incorrect.
117 The IOCTL call issued by the application is not correct.
118 The value of the check-on-write parameter is incorrect.
119 The system does not support the requested command.
120 This function is not supported by the system.
121 The semaphore timeout has expired.
122 The data area passed to a system call is insufficient.
123 Incorrect file, directory, or volume name syntax.
124 Invalid system call level.
125 The disk has no volume label.
126 The specified module could not be found.
127 The specified procedure could not be found.
128 There are no child processes to wait for.
129 Application xxx cannot be run in Win32 mode.
130 Attempted to use a file descriptor on an open disk partition for an operation other than raw disk I/O.
131 Attempt to move file pointer before start of file.
132 Unable to establish file pointer to specified device or file.
133 The JOIN or SUBST commands cannot be used for a drive that already contains joined drives.
134 Attempting to use a JOIN or SUBST command on a drive that has already been joined.
135 Attempting to use a JOIN or SUBST command on a drive that has already been substituted.
136 The system attempted to unjoin an unjoined reader.
137 The system attempted to remove the substitution from an unsubstituted drive.
138 The system attempted to attach a drive to a directory stored on an attached drive.
139 The system attempted to substitute a drive for a directory stored on a substituted drive.
140 The system attempted to attach a drive to a directory stored on a substituted drive.
141 The system attempted to substitute a drive for a directory stored on an attached drive.
142 JOIN or SUBST operation not possible now.
143 The system cannot attach or substitute a drive to a directory on that same drive.
144 The directory is not a subdirectory of the root directory.
145 The directory is not empty.
146 The specified path is used in a substitution.
147 Insufficient resources to process this command.
148 Cannot use specified path now.
149 Attempting to join or override a drive whose directory is the target of a previous override.
150 Either system trace information was not specified in your CONFIG.SYS file, or tracing is prohibited.
151 The number of semaphore events specified for DosMuxSemWait is not correct.
152 DosMuxSemWait did not run. Too many semaphores have already been established.
153 Invalid DosMuxSemWait list.
154 The volume label entered exceeds the character limit of the destination file system.
155 Could not create another thread.
156 The receiving process refused the signal.
157 The segment is already abandoned and cannot be locked.
158 Segment already unlocked.
159 Thread ID address is incorrect.
160 One or more arguments are invalid.
161 The specified path is invalid.
162 A signal is already pending.
164 The system cannot create more threads.
167 Unable to lock part of a file.
170 The requested resource is in use.
173 No lock request was pending for the undo region.
174 The file system does not allow atomic lock type changes.
180 The system detected an incorrect segment number.
182 The operating system cannot run xxx.
183 Unable to create an existing file.
186 The passed flag is incorrect.
187 The specified system semaphore name was not found.
188 The operating system cannot run xxx.
189 The operating system cannot run xxx.
190 The operating system cannot run xxx.
191 Cannot run xxx in Win32 mode.
192 The operating system cannot run xxx.
193 xxx is not a valid Win32 application.
194 The operating system cannot run xxx.
195 The operating system cannot run xxx.
196 The operating system cannot run this application program.
197 Currently, the operating system is not configured to run this application.
198 The operating system cannot run xxx.
199 The operating system cannot run this application program.
200 The code segment cannot be greater than or equal to 64 KB.
201 The operating system cannot run xxx.
202 The operating system cannot run xxx.
203 The system could not find the specified environment option.
205 No process in the command subtree has a signal handler.
206 Filename or extension too long.
207 Ring 2 stack is currently in use.
208 Wildcard characters (* or ?) were specified incorrectly or too many.
209 The signal to be registered is incorrect.
210 The signal handler cannot be established.
212 The segment is locked and cannot be reassigned.
214 Too many dynamic link modules are attached to this program or dynamic link module.
215 Unable to nest LoadModule calls.
216 Image file xxx is valid, but is for a different type of computer than the current computer.
230 The status of the communication channel is invalid.
231 All instances of the communication channels are busy.
232 The communication channel is about to be closed.
233 There is no process at the other end of the pipe.
234 More data is available.
240 The session has been cancelled.
254 The extended attribute (EA) name specified was invalid.
255 Extended Attributes (EA) are inconsistent.
258 Timeout exceeded.
259 No data available.
266 Copy functions cannot be used.
267 The directory name is incorrect.
275 Extended Attributes (EA) do not fit in buffer.
276 The extended attributes file on the mounted filesystem is corrupt.
277 The Extended Attributes (EA) table file is full.
278 The extended attribute (EA) descriptor specified is invalid.
282 The mounted filesystem does not allow extended attributes.
288 Attempting to free a mutex not owned by the caller.
298 A semaphore has experienced too many registrations.
299 Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
300 The oplock request is denied.
301 An invalid oplock acknowledgment was received by the system.
302 The volume is too fragmented to complete this operation.
303 The file cannot be opened because it is being deleted.
317 The message text associated with number 0xxxx could not be found in the message file for xxx.
487 Attempting to access an invalid address.
534 Arithmetic result exceeding 32 bits.
535 There is a process at the other end of the pipe.
536 The system is waiting for a process to open the other end of the pipe.
994 Access to extended attribute (EA) was denied.
995 The I/O operation was aborted due to thread termination or application request.
996 The overlapped I/O event is not in a signaled state.
997 An overlapped I/O operation is in progress.
998 The access to this memory location is invalid.
999 Error during paging operation.
1001 Recurrence too deep; stack overflowed.
1002 The window cannot act on the sent message.
1003 Could not perform this function.
1004 Invalid flags.
1005 The volume does not contain a known file system. Check if all necessary file system drivers are loaded and if the volume is not damaged.
1006 The open file is no longer valid because the volume that contains it has been externally damaged.
1007 The requested operation cannot be performed in full screen mode.
1008 Attempting to reference a token that does not exist.
1009 The configuration registry is corrupt.
1010 Invalid configuration registry key.
1011 Unable to open configuration registry key.
1012 Unable to read configuration registry key.
1013 Unable to write configuration registry key.
1014 One of the files in the registry database had to be restored by means of a journal or a copy. Restore was successful.
1015 The registry is damaged. The structure of one of the files containing registry data or the system memory image of the file is damaged, or the file cannot be found because a copy or log is missing or damaged.
1016 An I/O operation initiated by the registry failed fatally. The registry was unable to read or write information from one of the files containing its system image, or clear this file.
1017 The system attempted to load or restore a file in the registry, but the specified file does not have a registry file format.
1018 Unauthorized operation attempted on a registry key marked for deletion.
1019 The system could not allocate the requested space in a registry log.
1020 Unable to create a symbolic link in a registry key that already has subkeys or values.
1021 Unable to create a stable subkey under a volatile parent key.
1022 A change notification request is being completed and information is not returned in the caller’s buffer. The caller must enumerate the files to detect changes.
1051 A stop command has been sent to a service that several other running services depend on.
1052 The requested command is not valid for this service.
1053 The service did not respond quickly enough to the launch or control request.
1054 A thread could not be created for the service.
1055 Services database is locked.
1056 An instance of the service is already running.
1057 The account name is invalid or does not exist, or the password is invalid for the specified account name.
1058 The service cannot be started because it is disabled or has no enabled device associated with it.
1059 Specifying a circular service dependency.
1060 The specified service does not exist as an installed service.
1061 The service cannot accept orders at this time.
1062 The service has not been started.
1063 The service process could not connect to the service controller.
1064 An exception occurred in the service while processing the command.
1065 The specified database does not exist.
1066 The service returned an error code specific to it.
1067 The process terminated unexpectedly.
1068 The dependency service or group failed to start.
1069 A failed login prevented the service from starting.
1070 After starting, the service stopped in a wait state.
1071 The specified services database lock is invalid.
1072 The specified service has been marked for deletion.
1073 The specified service already exists.
1074 The system is currently running using the last known good configuration.
1075 The dependency service does not exist or has been marked for deletion.
1076 The current boot has already been accepted for use as the Last Known Good Configuration.
1077 No attempt to start the service has been made since the last boot.
1078 This name is already used as service name or service name for display.
1079 The account specified for this service is different from the account specified for other services running in the same process.
1080 Failure actions can only be set for Win32 services, not drivers.
1081 This service runs in the same process as the Service Control Manager. For this reason, the Service Control Manager cannot take action if this service process terminates unexpectedly.
1082 No recovery program has been configured for this service.
1083 The program in which this service should run does not implement the service.
1084 This service cannot be started in safe mode
1100 The physical tape end has been reached.
1101 A filemark was reached while accessing the tape.
1102 Beginning of tape or score encountered.
1103 The end of a filegroup was reached while accessing the tape.
1104 No more data on tape.
1105 Failed to partition tape.
1106 The current block size is incorrect for accessing a new tape of a multi-volume partition.
1107 Tape partition information not found while loading a tape.
1108 Unable to lock the media ejection mechanism.
1109 Failed to unload media.
1110 The media used in the drive may have changed.
1111 The I/O bus has been reset.
1112 No media in drive.
1113 There is no mapping for the Unicode character in the target multibyte code page.
1114 A dynamic library (DLL) initialization routine failed.
1115 A system shutdown is in progress.
1116 Since the system is not shutting down, the system shutdown cannot be undone.
1117 Unable to complete the request due to an I/O device error.
1118 Failed to initialize serial device. The serial driver will be unloaded.
1119 Could not open a device that shared an interrupt (IRQ) with other devices. At least one of the other devices using this IRQ was already open.
1120 A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER counter has reached zero.)
1121 A serial I/O operation was completed because the timeout expired. (The IOCTL_SERIAL_XOFF_COUNTER counter did not reach zero.)
1122 No ID address mark found on diskette.
1123 Mismatch between diskette sector ID field and diskette drive controller track address.
1124 The floppy disk controller reported an error not recognized by the floppy drive driver.
1125 The floppy drive controller returned inconsistent results in its registers.
1126 While accessing the hard drive, a recalibration operation failed despite repeated attempts.
1127 While accessing the hard disk, a disk operation failed despite retries.
1128 While accessing the hard disk, a necessary disk controller reset was not possible.
1129 End of physical tape encountered.
1130 Insufficient memory on the server to process this command.
1131 A potential Lethal Embrace has been detected.
1132 The base address or offset in the file is not aligned correctly.
1140 An attempt to change the system power state was vetoed by another application or driver.
1141 BIOS tried unsuccessfully to change the system power state.
1142 An attempt was made to create more links than the maximum number allowed by the file system.
1150 The specified program requires a newer version of Windows.
1151 The specified program is not a Windows or MS-DOS program.
1152 Could not start multiple instances of the specified program.
1153 The specified program was written for an earlier version of Windows.
1154 One of the libraries needed to run this application is damaged.
1155 No application is associated with the specified file for this operation.
1156 An error occurred while sending the command to the application.
1157 One of the libraries needed to run this application could not be found.
1158 The current process has used all of its system-allocated set of descriptors for Window Manager objects.
1159 Message can only be used with synchronous operations.
1160 The specified source element has no media.
1161 The specified destination element already contains media.
1162 The specified element does not exist.
1163 The specified item is from a magazine that is not present.
1164 The specified device requires a reset due to hardware errors.
1165 The device has indicated that cleaning is required before further operations are attempted.
1166 The device indicated that its door is open.
1167 The device is not connected.
1168 Element not found.
1169 No match for specified key in index.
1170 The property set specified does not exist on the object.
1171 The point passed to GetMouseMovePoints is not in the buffer.
1172 The tracing service (workstation) is not running.
1173 The volume identifier could not be found.
1175 Unable to delete the file to be replaced.
1176 Unable to move replacement file to file to be replaced. The file to be replaced has retained its original name.
1177 Unable to move replacement file to file to be replaced. The file to be replaced has been renamed using the backup name.
1178 The volume change journal is being deleted.
1179 The volume change log is not active.
1180 A file was found, but it may not be the correct file.
1181 The log entry has been deleted from the log.
1200 The specified device name is invalid.
1201 The device is not currently connected, but it is a remembered connection.
1202 The local device name has a connection stored on another network resource.
1203 No network software accepted the provided network path.
1204 The specified network software name is invalid.
1205 Unable to open network connections profile.
1206 The network connections profile is corrupt.
1207 Cannot enumerate an object that is not a container.
1208 An extended error has occurred.
1209 The format of the specified group name is invalid.
1210 The format of the specified computer name is invalid.
1211 The format of the specified event name is invalid.
1212 The format of the specified domain name is invalid.
1213 The format of the specified service name is invalid.
1214 The format of the specified network name is invalid.
1215 The format of the specified share name is invalid.
1216 The specified password format is invalid.
1217 The format of the specified message name is invalid.
1218 The format of the specified message destination is invalid.
1219 Multiple connections to a server or shared resource by the same user, using more than one username, are not allowed. Delete all previous connections to the server or shared resource and start over.
1220 An attempt was made to establish a session with a network server when the maximum number of sessions on this server had already been exceeded.
1221 The workgroup or domain name is already in use by another computer on the network.
1222 Either there is no network or the network has not started.
1223 The operation was canceled by the user.
1224 The requested operation could not be performed on a file that has a user mapped section open.
1225 The remote system refused the network connection.
1226 The network connection was closed gracefully.
1227 The network transport endpoint already has an address associated with it.
1228 An address has not yet been associated with the network endpoint.
1229 An operation was attempted on a network connection that does not exist.
1230 An invalid operation was attempted on an active network connection.
1231 The network location cannot be reached. For network troubleshooting information, see Windows Help.
1232 The network location cannot be reached. For network troubleshooting information, see Windows Help.
1233 The network location cannot be reached. For network troubleshooting information, see Windows Help.
1234 No services are running on the destination network endpoint of the remote system.
1235 The request was aborted.
1236 The network connection has been terminated by the local system.
1237 The operation could not be completed. A new test must be carried out.
1238 A connection to the server could not be made because the maximum number of concurrent connections has been reached.
1239 Attempting to log in during a time slot or day not allowed for this account.
1240 The account is not authorized to log in from this station.
1241 The network address could not be used for the requested operation.
1242 The service is already registered.
1243 The specified service does not exist.
1244 The requested operation was not performed because the user was not authenticated.
1245 The requested operation was not performed because the user is not connected to the network. The specified service does not exist.
1246 Continue work in progress.
1247 Attempting to perform an initialization operation when initialization has already taken place.
1248 No additional devices available.
1249 The specified site does not exist.
1250 A domain controller with the specified name already exists.
1251 This operation is only supported when connected to the server.
1252 The Group Policy framework should call the extension even when there is no change.
1253 The specified user does not have a valid profile.
1254 This operation is not supported on a Microsoft Small Business server
1255 The server is shutting down.
1256 The remote system is not available. For information about network troubleshooting, see Windows Help.
1257 The security identifier provided is not from a domain account.
1258 The security identifier provided does not have a domain component.
1259 The AppHelp dialog was canceled preventing the application from starting.
1260 Windows cannot open this program because it has been prevented by a software restriction policy. For more information, open the event log or contact your system administrator.
1261 A program is attempting to use an invalid registry value, normally caused by an uninitialized registry. This error is specific to Itanium systems.
1262 The share is currently offline or does not exist.
1263 The Kerberos protocol encountered an error while validating the KDC certificate during smart card logon.
1264 The Kerberos protocol encountered an error while attempting to use the smart card subsystem.
1265 The system has detected a potential security breach attempt. Verify that you can contact the server that authenticated you.
1266 The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log.
1267 An untrusted certificate authority was detected While processing the smartcard certificate used for authentication. Please contact your system administrator.
1268 The revocation status of the smartcard certificate used for authentication could not be determined. Please contact your system administrator.
1269 The smartcard certificate used for authentication was not trusted. Please contact your system administrator.
1270 The smartcard certificate used for authentication has expired. Please contact your system administrator.
1271 The computer was locked and cannot be shut down without the force option.
1273 An application set callback returned invalid data at the time of the call.
1274 Group Policy framework should call extension in synchronous foreground policy refresh.
1275 Driver loading was blocked
1276 A dynamic link library (DLL) referred to a module that is neither a DLL nor the executable image of a process.
1300 The caller does not have all the privileges referenced.
1301 A mapping between account names and security IDs was not performed.
1302 No system quota limits have been set specifically for this account.
1303 No encryption key is available. A known encryption key was returned.
1304 The password is too complex to convert to a LAN Manager password. The returned LAN Manager password is a null string.
1305 Unknown version number.
1306 Indicates two incompatible version numbers.
1307 This security ID cannot be set as the owner of this object.
1308 This security ID cannot be set as the primary group of an object.
1309 A thread that is not currently using a client’s identity attempted to act on an impersonation token.
1310 The group cannot be disabled.
1311 No access server is currently available to service the logon request.
1312 A specified logon does not exist. It may already be finished.
1313 A specified privilege does not exist.
1314 The client does not have a necessary privilege.
1315 The name provided is not a properly formed account name.
1316 The specified user already exists.
1317 The specified user does not exist.
1318 The specified group already exists.
1319 The specified group does not exist.
1320 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
1321 The specified user account is not a member of the specified group.
1322 You cannot disable or delete the last remaining administrative account.
1323 Failed to update password. The value provided as the current password is incorrect.
1324 Failed to update password. The new password provided contains values ​​that are not allowed in passwords.
1325 Failed to update password. The value provided by the new password does not meet domain length, complexity, or history specifications.
1326 Logon failure: unknown username or bad password.
1327 Logon failure: User account restriction. Possible reasons are blank passwords not being allowed, restrictions on logon hours, or a policy restriction has been applied.
1328 Logon failure: Access time restriction violation.
1329 Logon Failure: User not authorized to log on to this computer.
1330 Logon failure: The specified account password has expired.
1331 Logon Failed: Account currently disabled.
1332 The mapping between account names and security IDs was not done.
1333 Too many local user identifiers (LUIDs) were requested at once.
1334 There is no longer a local user identifier (LUID) available.
1335 The sub-authority part of a security ID is not valid for this particular usage.
1336 Invalid access control list (ACL) structure.
1337 Invalid security ID structure.
1338 Invalid security descriptor structure.
1340 Unable to build inherited Access Control List (ACL) or Access Control Item (ACE).
1341 The server is currently disabled.
1342 The server is currently activated.
1343 The supplied value is not valid for an identifier authority.
1344 There is no more memory available for security information updates.
1345 The specified attributes are invalid or incompatible with the attributes defined for the group as a whole.
1346 Either a required impersonation level was not provided, or the provided impersonation level is invalid.
1347 Unable to open an anonymous level security token.
1348 The category of validation information requested is invalid.
1349 The type of the token is inappropriate for this kind of use.
1350 Unable to perform a security operation on an object that has no security associated with it.
1351 The configuration information could not be read from the domain controller because the computer is unavailable or access was denied.
1352 The SAM (Security Accounts Manager) or LSA (Local Security Authority) server was not in the proper state to perform the security operation.
1353 The domain was not in the proper state to complete the security operation.
1354 This operation is only allowed for the primary domain controller.
1355 The specified domain either does not exist or could not be contacted.
1356 The specified domain already exists.
1357 Attempting to exceed maximum number of domains per server.
1358 The requested operation is not possible due to an unrecoverable failure of the media or a corrupt data structure on disk.
1359 An internal error has occurred.
1360 Generic access types that should have already been mapped to non-generic access types were encountered in an access mask.
1361 A security descriptor is not in the correct format (absolute or self-relative).
1362 Only logon processes can use the requested action. The calling process did not register as a logon process.
1363 Unable to open a new session with an ID already in use.
1364 A specified authentication package is unknown.
1365 The open session is not compatible with the requested operation.
1366 Login ID is already in use.
1367 A logon request contains an invalid connection type value.
1368 Cannot impersonate using a named pipe until data has been read from that pipe.
1369 The transaction state of a registry subtree is incompatible with the requested operation.
1370 An internal security database is corrupt.
1371 Cannot perform this action on predefined accounts.
1372 Cannot perform this action on this built-in special group.
1373 Unable to perform this action on this predefined special user.
1374 The user cannot be kicked out of the group because the group is currently their primary group.
1375 The token is already in use as the primary token.
1376 The specified local group does not exist.
1377 The specified account name is not a member of the local group.
1378 The specified account name is already a member of the local group.
1379 The specified local group already exists.
1380 Logon Failure: The user does not have the requested logon type on this computer.
1381 The maximum number of secrets that can be stored on a given system has been exceeded.
1382 The length of a secret exceeds the maximum allowed.
1383 The LSA (Local Security Authority) database has an internal inconsistency.
1384 During a logon attempt, the user’s security context accumulated too many security IDs.
1385 Logon Failure: The user does not have the requested logon type on this computer.
1386 A cross-coded password is required to change the user password.
1387 Cannot add or remove a member of the local group because that member does not exist.
1388 A new member cannot be added to the local group because that member has the wrong account type.
1389 Too many security IDs were specified.
1390 A cross-coded password is required to change the password for this user.
1391 Indicates that an ACL does not contain inheritable components.
1392 The file or directory is damaged and unreadable.
1393 The disk structure is corrupted and unreadable.
1394 There is no user session key for the specified logon.
1395 The service you are accessing is licensed for a particular number of connections. It is not possible to make any more connections to the service at this time because there are already as many connections as the service can accept.
1396 Logon failure: The target account name is incorrect.
1397 Mutual authentication failed. The server password is outdated on the domain controller.
1398 Time and date are not the same between client and server.
1399 This operation cannot be performed on the current domain.
1400 Invalid window handle.
1401 Invalid menu descriptor.
1402 Invalid cursor descriptor.
1403 Invalid accelerator table descriptor.
1404 Invalid hook descriptor.
1405 Descriptor to invalid multiple window structure.
1406 Unable to create a top child window.
1407 Window class not found.
1408 Invalid window, part of another thread.
1409 The access key is already registered.
1410 The class already exists.
1411 The class does not exist.
1412 There are still open windows in this class.
1413 Invalid index.
1414 Invalid icon descriptor.
1415 Using private dialog window words.
1416 List box identifier not found.
1417 No wildcards.
1418 The thread does not have an open clipboard.
1419 The hotkey is not registered.
1420 The window is not a valid dialog window.
1421 Control ID not found.
1422 Invalid message for an editable list because it has no edit control.
1423 The window is not an editable list.
1424 The height must not exceed 256.
1425 Invalid device context handle (DC).
1426 Invalid hook procedure type.
1427 Invalid hook procedure.
1428 Cannot establish a non-local hook without a module descriptor.
1429 This hook procedure can only be set globally.
1430 The journal hook procedure is already installed.
1431 The hook procedure is not installed.
1432 Invalid message for a single selection list box.
1433 LB_SETCOUNT sent to an active list box.
1434 This list box does not allow tab stops.
1435 Cannot destroy an object created by another thread.
1436 Child windows cannot have menus.
1437 The window has no system menu.
1438 Invalid message box style.
1439 Invalid system-scoped parameter (SPI_*).
1440 Screen already locked.
1441 All window descriptors in a multiple window structure must have the same parent.
1442 The window is not a child window.
1443 Invalid GW_* command.
1444 Invalid thread identifier.
1445 Unable to process a message from a window that is not an MDI (multiple document interface) window.
1446 Drop-down menu already active.
1447 The window has no scroll bars.
1448 Scrollbar interval cannot exceed MAXLONG.
1449 Unable to show or suppress the window in the manner specified.
1450 Insufficient system resources to complete the requested service.
1451 Insufficient system resources to complete the requested service.
1452 Insufficient system resources to complete the requested service.
1453 Insufficient quota to complete the requested service.
1454 Insufficient quota to complete the requested service.
1455 The paging file is insufficient to complete this operation.
1456 No menu item found.
1457 Invalid keyboard layout descriptor.
1458 Hook type not allowed.
1459 This operation requires an interactive window station.
1460 This operation completed because the timeout period expired.
1461 Invalid screen descriptor.
1500 The event log file is corrupt.
1501 The event log file could not be opened, so the event logging service did not start.
1502 The event log file is full.
1503 The event log file has changed between read operations.
1601 Unable to access the Windows Installer service. This can happen if you are running Windows in Safe Mode. Contact your technical support for assistance.
1602 User canceled installation.
1603 Fatal error during installation.
1604 Installation pending and not completed.
1605 This action is only valid for currently installed products.
1606 The feature identifier is not registered.
1607 The component identifier is not registered.
1608 Unknown property.
1609 The descriptor is in an invalid state.
1610 The configuration data for this product is corrupt. Contact your technical support.
1611 Missing component qualifier.
1612 The installation source for this product is not available. Verify that the source exists and that you have access to it.
1613 The installer package cannot be installed by the Windows Installer service. You must install a service pack that contains a newer version of the Windows Installer service.
1614 The product is uninstalled.
1615 Invalid or unsupported SQL query syntax.
1616 The field for the record does not exist.
1617 The device has been deleted.
1618 Another installation is already in progress. Complete it before performing this installation.
1619 Unable to open installation package. Verify that the package exists and that you have access to it, or contact the application vendor to verify that it is a valid Windows Installer package.
1620 Unable to open the installation package. Contact the application vendor to verify that this is a valid Windows Installer package.
1621 An error occurred while starting the Windows Installer service user interface. Contact your technical support.
1622 Error opening installation log file. Verify that the specified log file location exists and is writable.
1623 The language of this installation package is not supported by the system.
1624 Error applying transformations. Verify that the transformation paths specified are valid.
1625 Installation is prohibited by system policy. Contact your system administrator.
1626 Failed to execute function.
1627 The function failed during execution.
1628 The specified table is invalid or unknown.
1629 The supplied data has the wrong type.
1630 Data of this type is not supported.
1631 The Windows Installer service failed to start. Contact your technical support.
1632 The drive containing the temporary directory is full or inaccessible. Free some space on the drive or verify that you have write permission to the temporary directory.
1633 This installation package is not supported on this type of processor. Contact your product retailer.
1634 Component not used on this computer.
1635 Unable to open this patch package. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
1636 Unable to open this patch package. Contact the application vendor to verify that this is a valid Windows Installer patch package.
1637 This patch package is not executable by the Windows Installer service. You must install a service pack that contains a newer version of the Windows Installer service.
1638 Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product use Add/Remove Programs from Control Panel.
1639 Invalid command line argument. See the Windows Installer SDK for detailed command line help.
1640 Only administrators have the right to add, remove, or configure software on the server during a remote Terminal Server session. If you want to install or configure software on the server, contact your network administrator.
1641 The requested operation completed successfully. The computer will be restarted to take the changes into account.
1642 The upgrade patch cannot be installed by the Windows Installer service because the program to upgrade is missing, or the upgrade patch is for a different version of the program. Verify that the program to be upgraded exists on your computer and that your upgrade patch is correct.
1643 The patch package is not allowed by software restriction policy.
1644 One or more customizations are not allowed by software restriction policy.
1700 Invalid string binding.
1701 Binding handle is of the wrong type.
1702 Invalid binding handle.
1703 The RPC protocol sequence is not supported.
1704 The RPC protocol sequence is invalid.
1705 The universally unique identifier (UUID) of the string is invalid.
1706 Invalid endpoint format.
1707 Invalid network address.
1708 Endpoint not found.
1709 Invalid timeout value.
1710 The object’s Universal Unique Identifier (UUID) could not be found.
1711 The object’s universally unique identifier (UUID) has already been registered.
1712 The type Universal Unique Identifier (UUID) has already been registered.
1713 The RPC server is already listening.
1714 No protocol sequence was registered.
1715 The RPC server is not listening.
1716 Unknown handler type.
1717 Unknown interface.
1718 There is no binding.
1719 There is no protocol sequence.
1720 Failed to create endpoint.
1721 Insufficient resources to accomplish this operation.
1722 The RPC server is not available.
1723 The RPC server is too busy to complete this operation.
1724 Invalid network options.
1725 There is no active remote procedure call in this thread.
1726 Remote procedure call failed.
1727 The remote procedure call failed and did not execute.
1728 An RPC protocol error has occurred.
1730 The forwarding syntax is not supported by the RPC server.
1732 The Universally Unique Identifier (UUID) type is not recognized.
1733 Invalid ddname.
1734 Invalid array bounds.
1735 The binding does not contain a topic name.
1736 Invalid name syntax.
1737 The name syntax is not supported.
1739 No network address is available to construct a universally unique identifier (UUID).
1740 Endpoint is a duplicate.
1741 Unknown authentication type.
1742 The maximum number of calls is insufficient.
1743 String too long.
1744 RPC protocol sequence not found.
1745 Procedure number out of allowed range.
1746 The binding does not contain authentication information.
1747 Unknown authentication service.
1748 Unknown authentication level.
1749 Invalid security context.
1750 Unknown authorization service.
1751 Invalid field.
1752 The server endpoint cannot complete the operation.
1753 The endpoint mapper has no more endpoints available.
1754 No interface was exported.
1755 Incomplete topic name.
1756 Invalid version option.
1757 There are no more members.
1758 There are no exports to undo.
1759 The interface was not found.
1760 Topic already exists.
1761 Topic not found.
1762 The name service is not available.
1763 The network address family is invalid.
1764 The requested operation is not supported.
1765 There is no security context available to allow impersonation.
1766 An internal error occurred during a remote procedure call (RPC).
1767 The RPC server attempted an integer division by zero.
1768 Addressing error on RPC server.
1769 A floating point operation performed by the RPC server caused a division by zero.
1770 A floating point operation performed by the RPC server caused an underflow.
1771 A floating point operation performed by the RPC server caused an overflow.
1772 The list of RPC servers available for auto-descriptor binding is exhausted.
1773 Unable to open character translation table file.
1774 The file containing the character translation table contains less than 512 bytes.
1775 A null context handle was passed from the client to the host during a remote procedure call (RPC).
1777 The context handle changed during a remote procedure call (RPC).
1778 The bind handles passed to a remote procedure call do not match.
1779 The stub is unable to get the remote procedure call (RPC) handle.
1780 A null reference pointer was passed to the stub.
1781 Enumeration value out of acceptable range.
1782 The number of bytes is insufficient.
1783 The relay received invalid data.
1784 The provided user buffer is not valid for the requested operation.
1785 The disk medium is not recognized. It may not be formatted.
1786 The workstation does not have a trust secret.
1787 The server security database does not have a computer account for the trust relationship with this workstation.
1788 The trust relationship between the primary domain and the trusted domain failed.
1789 The trust relationship between this workstation and the primary domain has failed.
1790 Network logon failure.
1791 A remote procedure call is already in progress for this thread.
1792 A logon attempt was made when the Net Logon service had not started.
1793 The user’s account has expired.
1794 The redirector is in use and cannot be unloaded.
1795 The specified printer driver is already installed.
1796 The specified port is unknown.
1797 Unknown printer driver.
1798 Unknown print processor.
1799 The specified splitter file is invalid.
1800 The specified priority is invalid.
1801 The printer name is invalid.
1802 The printer already exists.
1803 Invalid printer command.
1804 The specified data type is invalid.
1805 The specified environment is invalid.
1806 There is no longer a link.
1807 The account used is a cross-domain trust account. Use your global or local user account to access this server.
1808 The account used is a computer account. Use your global or local user account to access this server.
1809 The account used is a server trust account. Use your global or local user account to access this server.
1810 The specified domain name or security ID (SID) is not consistent with the trust information for this domain.
1811 The server is in use and cannot be unloaded.
1812 The specified image file did not contain a resource section.
1813 The specified resource type cannot be found in the image file.
1814 The specified resource name cannot be found in the image file.
1815 The specified resource language id cannot be found in the image file.
1816 There is not enough quota available to process this command.
1817 No interface was registered.
1818 The remote procedure call was canceled.
1819 Binding handle does not contain all necessary information.
1820 Communication failure while calling a remote procedure.
1821 The requested authentication level is not supported.
1822 No main name declared.
1823 The specified error is not a valid Windows RPC error code.
1824 A UUID that is only valid on this computer has been allocated.
1825 A security package specific error has occurred.
1826 Thread not cancelled.
1827 Invalid operation on encoding/decoding handle.
1828 Incompatible version of serialization package.
1829 Incompatible version of RPC card.
1830 The RPC channel object is invalid or corrupted.
1831 An invalid operation was attempted on a given RPC channel object.
1832 RPC channel version is not supported.
1898 Group member not found.
1899 Failed to create endpoint mapper database entry.
1900 The object’s universally unique identifier (UUID) is the null UUID.
1901 The specified time is invalid.
1902 The specified form name is invalid.
1903 The specified form size is invalid.
1904 Someone is already waiting on the specified printer descriptor.
1905 The specified printer has been deleted

Last updated on 2014-04-28 by alhuno1


See more information related to the topic computer error code numbers

Whirlpool Cabrio Washer & Dryer Diagnostic Mode & Read Error Code List – How to

  • Author: Bens Appliances and Junk
  • Post date: 2020-03-11
  • Ratings: 4 ⭐ ( 3713 Ratings )
  • Match search results: Not every Whirlpool Cabrio washer or dryer is the same when it comes to putting them into diagnostics mode, but if your unit looks like this, then this is the video to watch on how to put it into diagnostics mode, as well as what options are available to you on tests to get your washer back up and running.

    DISCLOSURE: This post may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission.

    Affiliate Link & Earnings Disclosure: http://bit.ly/3oXeu3B

    If you need to buy an appliance part to fix your washer, make sure to use Appliance Part Pro’s model lookup system to get the EXACT part you need, to ensure it works – plus, you can return it if it doesn’t fix your issue: https://bit.ly/3pVxWyX

    Tools I use in all videos can be found at my Amazon Idea Page: https://www.amazon.com/shop/bensappliancesandjunk

    Did this video help you out? Send me a tip, and help me make more Appliance Repair videos for people to watch for free!

    PayPal: https://paypal.me/BensappliancesYT?locale.x=en_US
    CashApp: $BenjaminSchlichter

What computer error numbers mean

  • Author: gulfnews.com
  • Ratings: 4 ⭐ ( 2868 Ratings )
  • Match search results: Confused with what that error number is that keeps flashing up? Learn the meaning here

Error codes in Device Manager in Windows

  • Author: support.microsoft.com
  • Ratings: 3 ⭐ ( 3387 Ratings )
  • Match search results: Lists the error codes that may be reported by Device Manager and the possible resolutions in Windows.

System Error Codes (0-499) (WinError.h) – Win32 apps

  • Author: docs.microsoft.com
  • Ratings: 3 ⭐ ( 9119 Ratings )
  • Match search results: Describes error codes 0-499 defined in the WinError.h header file and is intended for developers.

List of Common Windows Error Codes and How to Fix them

  • Author: www.geekdashboard.com
  • Ratings: 3 ⭐ ( 6963 Ratings )
  • Match search results: Get the list of common windows error codes & beep sound errors. Solutions to fix them easily all at a single place. Use this as a reference to fix errors.

What do the error codes mean?

  • Author: www.hostmysite.com
  • Ratings: 4 ⭐ ( 7911 Ratings )
  • Match search results: Browser Error Codes. Linux and Windows ASP.NET, SQL, Coldfusion, and WebMatrix hosting backed by world class 24x7x365 toll free phone support

Computer POST and beep codes

  • Author: www.computerhope.com
  • Ratings: 5 ⭐ ( 2758 Ratings )
  • Match search results: Computer beep codes and other POST issues. Page includes AMI, Award, Dell, IBM, and Phoenix BIOS beep code help and information.

See more articles in this category: Computer tips